A long Banana leaf with natural edge cut-ins and retained supporting separations. Create your own tropical pattern using one reusable Mylar stencil and your choice of paint colour.
CHOOSE YOUR DESIGN HEIGHT The size selector refers to the height of the painted leaf, not the stencil sheet. Measurements below are width × height.
450 mm design height (17.72 in): painted design 190.5 × 450 mm (7.50 × 17.72 in); full sheet 295 × 550 mm (11.61 × 21.65 in).
600 mm design height (23.62 in): painted design 254.0 × 600 mm (10.00 × 23.62 in); full sheet 355 × 700 mm (13.98 × 27.56 in).
WHAT YOU RECEIVE One physical single-layer Mylar stencil sheet in the selected size. Paint and tools are not included. The wall and flat-surface guides show alternative application methods. No digital download is supplied.
HOW TO USE Test the surface, paint or pencil and any tape first. On a suitable wall, use tested low-tack tape to hold the stencil flat. On a supported flat workpiece, suitable tape or small weights on blank edges can help hold it down. Protect surrounding areas. Choose spray, a small roller, paintbrush or pencil to suit the surface. Mask surroundings for spray and follow the paint-label instructions, including ventilation guidance. Offload excess paint from brushes and rollers, apply light coats and avoid forcing paint beneath the edges. Trace the stencil openings with pencil if preferred; shade by hand if desired. Allow paint to dry before repositioning.
CARE Lift carefully. Let any paint dry. Clean for the medium used, then dry fully. Store flat; flatten rolled sheets before use.
Application scenes are illustrations. Shipping options and charges are shown at checkout.