Four tropical designs to arrange in your own layout: one Monstera leaf, one Areca palm, one Banana leaf and one Fan palm. The starter set contains four separate reusable Mylar stencil sheets. Each design is single-layer; these sheets are independent designs and do not stack into a multi-layer painting.
CHOOSE THE HEIGHT OF EACH DESIGN Choose 450 mm (17.72 in) or 600 mm (23.62 in) painted height for all four designs. The selector refers to each individual painted leaf height, not a combined arrangement or sheet size. All dimensions below are width × height.
450 MM EACH DESIGN HEIGHT (17.72 IN) Monstera Leaf: painted 289.5 × 450 mm (11.40 × 17.72 in); sheet 390 × 550 mm (15.35 × 21.65 in). Areca Palm: painted 267.2 × 450 mm (10.52 × 17.72 in); sheet 370 × 550 mm (14.57 × 21.65 in). Banana Leaf: painted 190.5 × 450 mm (7.50 × 17.72 in); sheet 295 × 550 mm (11.61 × 21.65 in). Fan Palm: painted 283.7 × 450 mm (11.17 × 17.72 in); sheet 385 × 550 mm (15.16 × 21.65 in).
600 MM EACH DESIGN HEIGHT (23.62 IN) Monstera Leaf: painted 386.0 × 600 mm (15.20 × 23.62 in); sheet 490 × 700 mm (19.29 × 27.56 in). Areca Palm: painted 356.3 × 600 mm (14.03 × 23.62 in); sheet 460 × 700 mm (18.11 × 27.56 in). Banana Leaf: painted 254.0 × 600 mm (10.00 × 23.62 in); sheet 355 × 700 mm (13.98 × 27.56 in). Fan Palm: painted 378.2 × 600 mm (14.89 × 23.62 in); sheet 480 × 700 mm (18.90 × 27.56 in).
WHAT YOU RECEIVE Four physical single-layer reusable Mylar sheets in your selected size: one of each named leaf. Paint and tools are not included. No digital download is supplied.
USE AND CARE Test the surface, paint or pencil and any tape first. On a suitable wall, use tested low-tack tape to hold the stencil flat. On a supported flat workpiece, suitable tape or small weights on blank edges can help hold it down. Protect surrounding areas. Choose spray, a small roller, paintbrush or pencil to suit the surface. Mask surroundings for spray and follow the paint-label instructions, including ventilation guidance. Offload excess paint from brushes and rollers, apply light coats and avoid forcing paint beneath the edges. Trace the stencil openings with pencil if preferred; shade by hand if desired. Allow paint to dry before repositioning.
Lift carefully. Let any paint dry. Clean for the medium used, then dry fully. Store flat; flatten rolled sheets before use.
Application scenes are illustrations. Shipping options and charges are shown at checkout.